Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who appreciates the nimble heating control of gas cooktops, but requires an electric oven for baking? Find a dual-fuel range cooker that gives you the best of both worlds.
Many experienced home chefs favor gas cooktops for their superior temperature control and ability to use advanced cooking techniques like grilling. These stoves are expensive, particularly when you need an additional gas hook-up and electrician to install it.
What is a 13amp plug?
If you have a dual fuel range cooker (also known as a gas cooker and an electric oven) you'll require an electrical outlet of 13 amps. The plug should be wired by a licensed electrician into the cooker ring.
This ensures that the current flowing through the plug is secure and not excessive, which could result in an electrical fire hazard. The plug has a fuse that controls the current. The fuse will blow as soon as it is overloaded. This protects the appliance against an overload of electricity.
The fuse is rated 13 amps, which is shown on top of the plug. This indicates the maximum amount of current the plug can pass without damaging the appliance or heating the socket. It is essential that when replacing fuses you always use the same amps as the original. If you replace the fuse using one with the different ratings, you are at risk of overheating the socket, and potentially putting yourself and others in high risk.
A 13 amp fuse will be a ceramic one that is extremely durable and can withstand the high temperatures produced by the range cooker. The ceramic element is also fire-proof, which makes it a better option than other types of fuse.
There are a few different ways in which a 13 amp plug can be fitted. The plug can be connected to a live socket with screws or a plastic jaw cord clamp. The cord clamp should be tightened after the plug has been tightly pushed into place.
Before connecting the wires you may need to remove the wiring diagram on cardboard that is placed over the pins of some plugs. The wires must be trimmed to the right length, as when they are too long they could be crushed when the plug covers are replaced. The earth wire should be the longest wire to ensure that it is connected prior to the line and neutral pins.
How do dual fuel range cookers for sale connect a 13amp plug?
The vast majority of dual fuel range cookers in the UK are connected to an outlet with a 13 amp rating and this is crucial because ovens draw a substantial amount of power and the standard plug sockets are designed to handle 10 amps.
In general, new appliances should be fitted with a plug at the point of sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances might not have a plug connected and this is the problem.
The first step to take when connecting a cooker with an existing plug socket is to check that the fuse rating of the fuse box is similar to that of the plug. This is crucial because an incorrectly-sized fuse can be dangerous.
It is also recommended to ensure that the fuse has been fully seated into the cartridge, and that there isn't any excessive movement. The next step is to prepare the flex to be used. Remove the sheathing to expose the three conductors insulated. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) with a utility knife, without piercing the individual conductors that are insulated. This nick should be wide enough that the sheathing can split and enlarge the nick as it is pulled back to reveal the cable underneath. Finally, cut off the excess sheathing leaving about 40mm extending beyond the flexing end.
The flex is then positioned over the plug with the earth terminal at the top and neutral and live terminals at the bottom. Using the conductors with the colors to guide you to the right direction, the sheathing should be removed from each pin, and the internal cable is then plugged into the appropriate terminal using the cord grip. If the plug is fitted with a screw-type cord clamp loosen it, and then pull back the insulation to expose the copper conductors. Connect each wire that is insulated to the appropriate terminal by using the plug's channel. Start with the earth conductor first, then the neutral and finally the live.
What is the maximum current draw of a plug with 13amps?
The maximum current draw of a 13amp plug is 3kw at 230volts. This is a significant amount of power, however the standard fuse that is fitted in a UK plug will not fail until the cable has reached to a dangerous temperature. A defective plug or socket can cause fire, so it's vital to be vigilant about how much you are using, especially in the kitchen.
The ceramic fuses used in plugtops are approximately 25mm and are suitable for 240V mains. The fuses are marked with an BS Kitemark or similar mark on the side and they will contain sand. Glass or plastic alternatives are available, but should not be used in conjunction with live plugs.
In the UK, most dual fuel range cookers are hard-wired. They cannot be plugged directly into the wall outlet. They are usually connected to a specific cooker ring circuit which is only suitable for appliances that draw up to 20 amps.
You can verify the ring circuit of your home by looking at the fuse box, or by speaking to an electrician in your area. Ask whether the sockets are connected to the same ring or if they're separate. They should also be able to inform you if there's an individual circuit that powers your oven.
If you're in the market for a new dual fuel range cooker the size of your kitchen is a vital factor to consider. Luckily, we have a large range of cookers that will fit any space, from compact 50 - 60cm dual fuel models, as well as massive 90cm + double oven options from the top brands such as Rangemaster and StovesAreUs.
We also offer a wide range of multifunction gas and electric cookers. These multifunction cookers can be used to cook a variety of dishes including pasta, casseroles and curries!
Currys offers a variety of Cookers. Explore our online collection or visit us in store to see them. We offer free home installation and delivery on selected range cookers as well as flexible payments options. Our team is available to answer any questions you may have. Contact us via email or phone. Credit is subject to status and terms & conditions apply.
What is the maximum draw of the switch on a cooker?
There is a lot of confusion about the maximum current draw for the cooker switch. The reality is that the majority of cookers aren't made to connect to an ordinary socket, but instead are wired hard and connected to a specific oven ring circuit. This is due to the fact that they typically consume more than 20 amps of power each time the gas and electric ovens are being used.
There aren't any dual fuel range cookers that can be fitted in a standard socket because this could create an extremely high risk of fire and violate electrical regulations. A professional electrician will always install any new electrics to a cooker in the kitchen and ensure that the total load (both the oven and hob) will not exceed the supply capability of that circuit.
The advantages of a dual fuel cooker are the receptive heating of a gas cooktop and the precise operation of an electric oven. They are therefore popular with both chefs and home cooks. Dual cookers that use fuel are great for trying out different cooking techniques, such as searing or charcoaling.
When you are looking to purchase a new range cooktop, you must consider several factors such as size, function and cost. In addition, you will be required to ensure that your home has an appropriate gas hook-up to the appliance. If you're not sure, it is best to book an appointment with a Gas Safe engineer to inspect your home prior to installation.
The Currys range of dual fuel range cookers includes options to fit a variety of budgets, ranging from low-cost models from Indesit and Zanussi to our own exclusive Essentials collection. If you're seeking something more sophisticated we have a selection of premium JennAir models, which feature several unique features.
It is essential to read the user's manual before purchasing a dual-fuel range cooker. This will provide specific information regarding the electrical and gas requirements. You will need an electric connection to your home. A plumber could be required to install it for you. Depending on your home you'll also need to make sure that you have a dedicated cooker ring circuit installed and signed off by a licensed electrician.